Buy your stretch film from us, and get a discount on this Wulftec stretch wrapper!
The WCA-SMART series is a competitively-priced extra heavy duty ring-gear driven conveyorized turntable stretch wrapping system.
Our Automatic stretch wrappers maximize throughput and efficiency. They take care of everything; you only change the roll of film. An automatic stretch wrapper will save significant time and money.
Turntable stretch wrappers are ideal for wrapping stable loads of under 8,000 lbs. They are typically less expensive than rotary arm models and have a smaller footprint – a definite asset when space is at a premium.
Please contact Pro Pac or call 888-318-0083 for your stretch wrapping equipment.
Production Rate | 70 loads per hour |
Machine Dimensions | 128.5" L x 199" W x 104" H |
Maximum Load Size | 48" L x 48" W x 80" H |
Load Weight | 4000 lbs |
Approximate Shipping Weight | 4750 lbs |
Electrical Requirements | 230 V /2 ph /60Hz 20A |
Pneumatic Requirements | 3 cfm @ 80 psi |
Controls | 24V control system Allen Bradley CompactLogix L16ER PLC with an integrated Ethernet port Allen Bradley PanelView Plus 600 color touch screen interface Sick autoheight sensing photoeye with on/off mode On Stand NEMA 4/12 control cabinet Power on/off lockable switch and indicator light One panel mounted emergency stop station Manual carriage Up/down function Manual function for turntable rotation fwd Manual clamp jog on touch screen Reset function Separate top and bottom wrap selection (0-9) Single carriage speed Conveyor jog fwd (fwd / rev optional) Alarm beacon Intuitive alarms diagnostic on touch screen Current overload protection Double brush dust tight slip ring 230VAC motors & variable frequency drives with contactor driven conveyors Film force to load control |
Structure | 14 gauge formed steel tower Heavy duty structural steel construction |
Film Delivery System | 20" NO-THREAD® Powered Pre-Stretch Carriage 1 HP AC motor with Allen Bradley variable frequency drive Lifetime warranty on pre-stretch rollers blue compound Film force release for easy pull at start and end of cycle 50-400% pre-stretch ratio (preset to customer spec, standard 200%) Electronic film tension control with analog sensor Film roping bar Lexan roller cover for operator safety Proximity sensor on carriage gate to ensure gate is properly closed |
Film Tail Treatment | Automated cut/clamp and wipe system Pulse controlled cutter Film alignment arm and brush on film tail treatment Brush-on film tail treatment Heat Seal treatment optional |
Film Carriage Drive | 1 HP AC motor with Allen Bradley variable frequency drive Two #40 carriage lifting chains Bearing supported maintenance free guide wheels |
Turntable Drive | 25" Heavy duty ring gear with pinion gear drive Max 16 RPM variable speed 1 HP 230VAC motor with Allen Bradley variable frequency drive Electronic soft start/stop Positive turntable alignment controlled by proximity sensor Electric brake |
Turntable Conveyor | 77" dia. 1/2" steel plate 2 1/2" dia. Rollers on 3 3/4" centers All full length rollers driven 3/16" wall cold rolled electric welded steel rollers 52" BFR (between frame rails) 1 HP AC motor with contactor #40 ANSI chain drive Heavy duty cast iron flange mounted bearing | Conveyors | 5' in / 5' out contoured powered conveyor with smooth transfer Standard 52" BFR (between frame rails) Standard pass height 18" Other pass heights available, please consult factory 2 1/2" diameter rollers on 3 3/4" centers 3/16" walls cold rolled electric welded steel rollers Rollers driven via #40 chainv 1 HP 230VAC motor and contactor Heavy-duty structural steel design, interlocking style for continuous equal roller spacing Heavy-duty cast iron flange mounted bearings 30 FPM fix conveyor speed Other speeds available |
Technical Information | The machine is provided with a manual including electro/mechanical schematics and drawings, maintenance program and PLC program disk |
Carriage | 30" NO-THREAD® powered pre-stretch carriage Carriage adaptor bracket for 20" film on 30" carriage Pneumatic roping dual Pneumatic roping single |
Control Cabinet | Upgrade control cabinet |
Controls | Allen Bradley drives - Basic system (includes forward / reverse) Communication bypass mode Lanyard remote Remote push button station Warning alarm / horn |
Extension | Wrap height extension - 104in Wrap height extension - 116in Wrap height extension - 92in |
Heat Seal | Arm mounted cut & seal Conveyor side mounted heat seal |
Motors | Wash down motors Wash-down motors for top platen |
Paint | Custom color Epoxy paint Steel-it paint |
Photoeye | Dark load detection Forklift detection |
Safety | Electric dump valve Safety fencing Safety light curtains Safety Package |
Scale | Electronic scale |
Temperature Package | Cold A (32 to 41°F / 0 to 5°C) Cold B (5 to 32°F / -15 to 0°C) - with infeed and outfeed Cold C (-31 to 5°F / -35 to -15°C) Fan & Exhaust Warm A (up to 115°F / up to 46°C) Warm B (104°F / 40°C and up) |