Buy your stretch film from us, and get a discount on this Wulftec stretch wrapper!
The Wulftec WCAT-450 stretch wrap system is an automatic rotary arm combined with a conveyorized turntable, the ideal stretch wrapping solution for high speed application. This versatile combo gives the possibility of switching operating modes: operation in only rotary arm mode, operation in only turntable mode, or operation in combo arm turntable mode at 45 RPM. Expect to improve productivity, operator efficiency while reducing film and labor costs.
Please contact Pro Pac or call 888-318-0083 for your stretch wrapping equipment.
Production Rate | 120 loads per hour |
Machine Dimensions | 259" L x 148" W x 140" H |
Maximum Load Size | 48" L x 48" W x 80" H |
Load Weight | 5000 lbs (6000 lbs optional) |
Approximate Shipping Weight | 12000 lbs |
Electrical Requirements | 230 V /3 ph /60Hz 35A |
Pneumatic Requirements | 3 cfm @ 80 psi |
Controls | NEMA 4/12 control cabinet with quick disconnect Allen Bradley PanelView Plus 600 color touch screen interface Allen Bradley CompactLogix L16ER PLC with an integrated Ethernet port 24V control system Current overload protection Sick autoheight sensing photoeye with on/off mode Power on/off lockable switch and indicator light 230VACMotors with AC variable frequency drives and contactors Four emergency stop stations (1 on panel / 1 in wrap zone / 1 on infeed and outfeed conveyor) Manual mode for rotation fwd/rev and carriage up/down Variable rotary arm speed (15 RPM) Double brush dust tight slip ring Intuitive alarms diagnostic & active maintenance screens Separate turntable and rotary arm rotation speed controls Separate top and bottom wrap selections (0-9) Separate up and down carriage speeds Film force to load control All conveyors with independent fwd/rev manual function Alarm beacon Dynamic braking system for rotary arm with AC drive 120 VAC outlet in control panel for service work |
Film Delivery System | 20" NO-THREAD® Powered Pre-Stretch (no film threading) 1 HP 230VAC Motor & AC variable frequency drive Lifetime warranty on pre-stretch rollers blue compound Film force release for easy pull at start and end of cycle 50-300% pre-stretch ratio (preset to customer specs-std 200%) Electronic film tension control with analog sensor Sensing device for film out/broken with visual alarm Lexan roller cover for operator safety Emergency stop for arm path obstruction Angled carriage to wrap approx. 2" from conveyor level |
Film Carriage Drive | 1 HP AC motor with Allen Bradley variable frequency drive Two #50 carriage lifting chains Dual steel supporting boom Power track for efficient guiding of wires Machined UHMW-PE carriage glides on 1/2" CRS rails |
Film Tail Treatment | Automatic film clamping device Pulsed controlled cutter Film alignment arm Brush-on film tail treatment Heat Seal treatment optional |
Structure | Heavy duty structural steel construction: easy access to all components Free standing integrated leg design (Four 6" x 6" legs) Counter-balanced rotary arm for smooth rotation Safety fencing with interlocked access door |
Rotary Arm Drive | 25" Heavy duty ring GEAR with pinion gear drive 0-30 RPM variable speed Dual steel boom rotary arm 2 HP 230VAC/ Motor & AC variable frequency drive Electronic soft start/stop Positive arm alignment controlled by proximity sensor Pneumatic braking system for rotary arm 45 RPM COMBINED ARM AND TURNTABLE SPEED! |
Turntable Drive | 25" Heavy duty ring GEAR with pinion gear drive 0-15 RPM variable speed 1 1/2 HP 230VAC motor with Allen Bradley variable frequency drive Electronic soft start/stop Positive turntable alignment controlled by proximity sensor Electric brake for turntable |
Safety Features | 5 photoeyes which monitor access points to wrapping zone and prevent accidental insertion of foreign object during wrapping 4 E-Stop mushroom type push buttons: 1 on control panel, 1 in wrapping zone, 1 on infeed conveyor and 1 on outfeed conveyor (Additional E-Stop are available upon request) Wrapping zone enclosed by heavy-duty personnel obstruction fencing complete with electronically interlocked access door An object obstruction safety device stops the machine functions should there be any interference in the wrapping area |
Conveyor | 2 x 7'6" powered roller infeed and outfeed conveyors with contour shape Standard pass height 18" Other pass heights available, consult factory 2- 1/2" diameter rollers on 3" centers 52" BFR (between frame rails) 3/16" walls cold rolled electric welded steel rollers All rollers driven via #40 chain 1 HP 230VAC motor with Allen Bradley variable frequency drive Heavy-duty structural steel design, interlocking style for continuous equal roller spacing Heavy-duty cast iron flange mounted bearings |
Turntable Conveyor | 77" dia. 1/2" steel plate turntable 2 1/2" dia. rollers on 3" centers All full length rollers driven 3/16" wall cold rolled electric welded steel rollers 52" BFR (between frame rails) 1 HP AC motor with Allen Bradley variable frequency drive Electronic soft start/stop Rollers driven via #40 chain Heavy duty cast iron flange mounted bearing |
Technical Information | The machine is provided with a manual including electro/mechanical schematics and drawings, maintenance program and PLC program disk |
Carriage | 30" NO-THREAD® powered pre-stretch carriage Pneumatic roping dual Pneumatic roping single |
Controls | Communication bypass mode Warning alarm / horn |
Heat Seal | Conveyor side mounted heat seal |
Motors | Wash-down motors on conveyor |
Photoeye | Dark load detection Forklift detection |
Safety | Safety package |
Scale | Electronic scale |
Temperature Package | Cold A (32 to 41°F / 0 to 5°C) Cold B (5 to 32°F / -15 to 0°C) without process conveyor Cold C (-31 to 5°F / -35 to -15°C) Fan & exhaust |