Buy your stretch film from us, and get a discount on this Wulftec stretch wrapper!
The WRT-CRW semi-auto rotary arm cocoon stretch wrapping system is a free standing 4-legged stretch wrapper. A heavy-duty semi-automatic rotary arm wrapper for large rolls requiring complete protective wrapping.
Please contact Pro Pac or call 888-318-0083 for your stretch wrapping equipment.
Production Rate | 30 loads per hour |
Machine Dimensions | 141.5" L x 130" W x 117.5" H |
Minimum Load Size | 12" L x 24" W x 24" H |
Maximum Load Size | 52" L x 52" W x 52" H |
Load Weight | 4000 lbs |
Approximate Shipping Weight | 3300 lbs |
Electrical Requirements | 120 V /1 ph /60Hz 15A |
Controls | Allen Bradley MicroLogix 1200 PLC 24V control system Current overload protection NEMA 4/12 control cabinet (can be located up to 10' from machine frame) Autoheight sensing photoeye Power on/off switch and status light Start/stop push button Large emergency stop (push / pull type) Manual carriage up/down function Variable rotary arm speed (12RPM) Separate up and down carriage speeds Separate top and bottom wrap selectors Reinforced wrap/manual rotation control Positive arm alignment controlled by proximity sensor Top cover pause switch (Splash proof program) Spiral up or spiral up/down switch Film force to load control Emergency stop sensor for arm path obstruction |
Structure | Heavy duty structural steel construction Free standing integrated 4-leg design 4 floor-mounting legs Easy access to all components |
Achoring Requirements | Wulftec recommends using heavy-duty expansion shields of 3/4" diameter thread size with a minimum anchor depth of 4" in concrete |
Film Delivery System | 20" NO-THREAD® Powered Pre-Stretch Carriage 1 HP AC motor with Allen Bradley variable frequency drive Lifetime warranty on pre-stretch rollers blue compound Film force release for easy pull at start and end of cycle 50-400% pre-stretch ratio (preset to customer spec, Std 200%) Electronic film tension control with analog sensor Lexan roller cover for operator safety Angled carriage to wrap approximately 2" from floor level Proximity sensor on carriage gate to ensure gate is properly closed |
Film Carriage Drive | 1 HP AC motor with Allen Bradley variable frequency drive Two #50 carriage lifting chains Dual 1/2" CRS ways with UHMW-PE carriage glides Dual structural steel supporting boom Power track for efficient guiding of wires |
Rotary Arm Drive | Heavy duty 25" ring gear with pinion gear drive 1 HP AC motor with Allen Bradley variable frequency drive 0-12 RPM variable speed Electronic soft start/stop Positive arm alignment controlled by proximity sensor Protection guard over the ring gear |
Cocoon Cradle | 4000 lb capacity 6 5/8" OD tubing 1/4" thick wall on tubing Frame made of 3/16" thick wall tubing 1 HP AC motor |
Technical Information | The machine is provided with a manual including electro/mechanical schematics and drawings, troubleshooting guide and installation instructions |
Carriage | 20" hydraulic carriage (no pre-stretch) 30" hydraulic carriage (no pre-stretch) 30" NO-THREAD® Powered pre-stretch carriage Carriage adaptor bracket for 20" film on 30" carriage Rapid Cut - standard panel |
Controls | Lanyard remote Pull cord Remote push button station Safety control lockout Upgrade from standard to deluxe Upgrade from standard to standard Plus Warning alarm / horn Warning flashing light |
Extension | Wrap arm diameter extension - 104in Wrap arm diameter extension - 116in Wrap arm diameter extension - 128in Wrap arm diameter extension - 140in Wrap arm diameter extension - 92in Wrap height extension - 104in Wrap height extension - 116in Wrap height extension - 92in |
Load Tilting Device | Kicker loading device |
Motors | Wash-down motors |
Paint | Epoxy paint Steel-It paint |
Photoeye | Dark load detection |
Safety | Safety fencing Safety light curtains Safety package |
Scale | Electronic scale |
Temperature Package | Cold A (32 to 41°F / 0 to 5°C) Cold B (5 to 32°F / -15 to 0°C) - Deluxe panel Cold B (5 to 32°F / -15 to 0°C) - Standard panel Cold C (-31 to 5°F / -35 to -15°C) Fan & Exhaust Warm A (up to 115°F / up to 46°C) Warm B (104°F / 40°C and up) |
Transformer | Customized transformer Standard transformer Transformer for Cold C temperature package |