The Pearson CS50-UG case sealer is optimized for boxes as small as 5" x 3.5" x 3.75" and reliably seals up to 50 cases per minute. The machine offers the optional capability of running tall, unstable and odd-size cases. A convenient bypass option eliminates the need for additional conveying when pre-sealed boxes or HSCs are introduced into the line. Advanced features such as high-visibility machine status lighting, non-contact interlocks, CAT-3 Safety Circuits, an easily accessible grace port, and an auxiliary operator station are standard on the machine.
Optimal Case Infeed Gaps: A built-in metering stop creates gaps between cases without the need to adjust infeed conveyor speed for each case.
Reduced Air Consumption, Less Maintenance, Higher Speeds: Servo-controlled trailing flap kicker increases speed, component longevity and reduces expensive air consumption by replacing air cylinders.
Case Squareness Protection: Spring loaded synchronous compensating side belts and squaring wheels ensure cases remain square throughout the closing and sealing process.
Secure Glue Bond: Urethane compression wheels guarantee a secure glue bond prior to the case exiting the machine by providing variable, regulatable pressure for compressing the glue lines.
Tall, Unstable Case Handling: Machine offers optional capability of reliably running tall, unstable and odd-size cases.
Detect Tape Related Errors: Sensors detect fail-to apply, fail-to-cut and low tape situation.
Fast Changeover: Fast changeovers are supported by the industry's most advanced HMI with an uncluttered design, intuitive navigation, interactive changeover and fault-recovery guides, live sensor maps and advanced maintenance features. Scales, pointers and quick release handles ensure additional tools are not necessary. Trained technicians can complete a changeover in under 3min.
Bypass Option for Pre-Sealed Boxes or Without Tops: No need to build by-pass conveyors when running cases not requiring sealing.
Safety Redundancy with CAT 3: Dual channel safety circuit maintains integrity of safety features in case of single component failure.
Highly Reliable Non-Contact Interlocks: Eliminates misalignment of guard door interlocks which prevents problems common to keyed interlocks.
High-Visibility Machine Status: A standard four-light LED beacon and multi-color interior machine lighting provides high-visibility of machine status.
Easily Accessible Grace Port: Grace ports provide convenient communication access and 110V convenience outlet at the outside of the machine’s electrical cabinet.
Convenient Dual Access to Machine: An auxiliary operator station enables machine control on both sides of the conveyor.
Remote Access Capability: Allows Pearson’s support team on-demand access to the equipment’s PLC and HMI through a secure VPN connection via an eWON router (ISECOM STAR and ISO27001 certified) to support emergency troubleshooting and reduce on-site visits.
Please contact Pro Pac or call 888-318-0083 for your case sealing equipment.
Specifications | |
Speed | Up to 50 cases/min |
Min. Case Size | 5"L x 3.5"W x 3.75"H Extended case size range available |
Max. Case Size | 16"L x 12"W x 14"H Extended case size range available |
Sealing | Hot Melt Adhesive |
Operation | Servo |
Changeover | Manual, supported by HMI graphical guided instructions and changeover map, scales, pointers, and quick release handles. 4 min (estimate for trained technician) |
Construction | Low pressure washdown Mild steel Stainless steel |
Machine Size Range (ft) | 14.5'L x 5'W x 5'H |
Controls | Allen-Bradley CompactLogix PLC PackML Compliant PanelView Color HMI |
Air Requirements | 80 PSI |
Power Requirements | 460 VAC |
Disconnect Sizes | 60 Amps |
Air Consumption | 0.314 SCF/Cycle |
FLA (Full Load Amp) of Base Machine | 31.3 Amps |
Case Support | CSSC RSC Ultra-small case sizes |
Please contact Pro Pac or call 888-318-0083 for your case sealing equipment.