Pro Pac offers competitive prices and outstanding customer service. Get a quote for the Dynaric D2400 Automatic High-Speed Strapper and see the Pro Pac difference.
The Dynaric D2400 is a high speed strapping machine designed to increase productivity and reduce machine downtime. When initiated the strap is pulled around the package then tightened to the precise tension, the plastic strap is then heated, sealed and pressed to create the best seal possible all in approx 1.2 seconds.
The D2400 high speed strapping machine has a low maintenance strapping head with minimal moving parts reducing mechanical malfunction due to part failure or wear. All body panels can be easily removed to access the strapping head, electrical box and strap pool area.
The D2400 is capable of using Dynaric's XL coil. Dynaric XL coils reduce 30% of machine downtime caused by coil changes therefore increasing throughput. To help keep the cost down, XL coils use less packing material compared to standard coils therefore passing additional saving on to you.
Specifications of the D2400
|Overall Width||24.6" (615 mm)|
|Overall Length||46.7" - 72.5" (1187 - 1844 mm)*|
|Overall Height||58.6" - 64.5" (1327 - 1642 mm)*|
|Table Height||29.5" - 35.4" (757 - 897 mm)|
|Weight||375 - 540 lbs (170 - 245 kg)*|
|Cycle Time||1.1 Seconds*|
|Cycle Initiation||Photoeye sensor or foot bar|
|Strap Size||1/4" or 3/8" (5 mm - 9 mm)|
|Sealing Method||Heat Seal|
|Seal Head Location||Bottom|
|Package Size||Minimum: 1.5"H x 3.0"WMaximum: Determined by arch|
|Tension||Adjustable electronic control|
|Dispenser||Externally located: 8" or 9" I.D. / 8" Face / 18" O.D.|
|Power||110 Volt, Single Phase|
*Depending on arch size