Pro Pac offers competitive prices and outstanding customer service. Get a quote for the Dynaric DF11LT Automatic Strapper and see the Pro Pac difference.
Buy your strapping material from us, and get a discount on this Dynaric strapping equipment!
The Dynaric DF11LT low profile model strapper designed for use in application where delivery systems are lower to floor level. This strapping machine has a 450mm (17.7") table height.
The DF11LT strapper has a fast cycle time of 1.6 seconds (dependent on arch and package size). Its design includes a rugged frame and roller tabletop construction with an integrated accumulator/dispenser system that minimizes required floor space. The arch configurations (height and width) increase independently in 200mm (approximately 8") increments, so configuring the arch for a specific application is not only desirable, it's doable.
Cycle initiation is by start switch or foot switch. Standard operating voltage is 220 volts – 3 phase. Single phase, as well as higher voltages are available options. This machine can be ordered to run 9mm (3/8") or 12mm (1/2") strap. The strapping material is heat sealed for maximum seal efficiency.
Specifications of the DF11LT
|Package Size||Min 1.6" W x 1.2" H Max depending on arch size|
|Overall Width||25.6" (650 mm)|
|Overall Length||74.8" (1900 mm)|
|Overall Height||54.9" (1395 mm)|
|Table Height||17.7" (450 mm)|
|Weight||510 lbs (232 kg)|
|Cycle Time||1.6 Seconds|
|Cycle Initiation||Palm switch or foot switch|
|Strap Size||3/8" or 1/2" (9 mm & 12 mm)|
|Sealing Method||Heat Seal|
|Seal Head Location||Bottom|
|Tension||Low tension; 40mm Stroke, stepless variety|
|Dispenser||Externally located: 9" I.D. / 8" Face / 18" O.D.|
|Power||120V, single phase (220V, 440V 3 phase, 60Hz optional)|