Logoppsxsmall
888-318-0083

Dynaric ST1HS Fully Automatic High-Speed Strapper

Dynaric ST1HS Fully Automatic High-Speed Strapping Machine

Get a Quick Quote

Pro Pac offers competitive prices and outstanding customer service. Get a quote for the Dynaric ST1HS Fully Automatic High-Speed Strapper and see the Pro Pac difference.

Strap a Wide Range of Corrugate Bundles

Equipped with variable speed powered belts, the Dynaric ST1HS fully automatic strapping machine eliminates the need for an operator. Although the unit can be switched to manual and used like an offline unit, the ST1HS is designed to operate automatically using photo switches to detect incoming packages. The ST1HS is equipped with an automatic strap feeding system as well as an end-of-strap sensing system with automatic strap discharge once a coil has been completed.

To decrease downtime due to frequent coil changes the ST1-HS is equipped with an externally located dispenser that can utilize Dynaric XL coils.

Features

Straps up to 48 bundles per minute
Adjustable strap width (from 5 - 9 mm), no additional parts required
Automatic strap feed
Strap end sensing system, automatic discharge of remaining strap
Up and downstream interlock
Height adjustable feet
Power cable, length 40"
PC control with operating unit and display signal processing via PLC control unit
Automatic strap tensioning, depending on height of bundle
Hinged tabletops
Table belt drive steplessly adjustable (frequency inverter)
Quick changing device for strap dispenser
Dissipation Fan

Specifications of the ST1HS

Overall Width 23.9" (608 mm)
Overall Length 58.1" (1477 mm)*
Overall Height 52.8" (1342.7 mm)*
Table Height 30.5" (776 mm)
Weight 374 lbs (170 kg)*
Cycle Time Up to 48 bundles per minute
Cycle Initiation Automatic photocell activation:
1 or 2 straps placed at fixed locations on the package
Compressed Air Operating Pressure: 87 psi (6 bar), Consumption App: 8.5 cfm (240 1/minute)
Strap Size 1/4" to 3/8" (5 mm - 9 mm)
Strap Tensioning Ultrasonic sensor for automatic height dependent on tensioning
Sealing Method Heat seal
Bundle Size Maximum: Determined by arch
Minimum: 3.9"W x .39"H
Seal Head Location Bottom
Sealing Method Heat seal
Mobility 2 swivel and 2 fixed casters
Dispenser Externally located: 8" or 9" I.D. / 8" Face / 18"O.D.
Power 220 or 440 Volt 3 Phase

* Depending on arch size