Dynaric CP1 High-Speed Commercial Printing Strapping Machine

Dynaric CP1 strapping machine

Click to enlarge

Dynaric CP1 strapping machine CP2 Fully Automatic Commercial Printing Strapping Machine Layout

Get a Quick Quote

Pro Pac offers competitive prices and outstanding customer service. Get a quote for the Dynaric CP1 High-Speed Commercial Printing Strapping Machine and see the Pro Pac difference.

Commercial Printing Strapping System

The CP1 is the lead machine in the CP series of commercial printing strapping systems. The CP1 is designed to stabilize the bundles of printed matter, especially hard to handle magazines printed on coated paper stock.

The CP1 machine has a close-coupled design that insures smooth transfer of the bundle between the stacker and the strapper. Once in the machine, the bundle is squared from the sides, compressed from the top, strapped and then ejected to be cross-strapped or wrapped.

The CP1 has a quick change feature that allows the machine to be adjusted to a different publication size in a matter of seconds.


High speed - 40 bundles per minute
Programmable logic controller
Automatic strap feeding
Digital diagnostic display for troubleshooting
Bundle conditioning system - air operated
Calibrated bundle guides and stops for quick adjustment
Warning light system
Swing arm command control panel
External tension control
Hinged conveyor tops and (3) access panels
Foam covered clamp for product protection
Mechanically actuated, segmented track
Accepts 5mm, 6mm
Removable dispenser - simplifies coil change

Specifications of the CP1

Overall Depth 22.8" (580 mm)
Overall Width 60.7" (1543 mm)
Overall Height 72.8" (1850 mm)
Table Height 32.9" (835 mm)
Weight 1100 lbs (500 kg)
Cycle Time 40 bundles per minute
Strap Size 5.8 mm
Sealing Method Heat Seal
Bundle Size W: 5.2" - 8.6"
H: .4" - 14.1"
L: 7.9" - 12.2"
Compressed Air 24 CFM, 90 PSI
Power 230 / 460 Volt, 3 Phase, 60Hz