Logoppsxsmall
888-318-0083

Dynaric D2300A Fully Automatic Strapping Machine - 3/8" or 1/2"

D2300A Fully Automatic Strapping Machine

Click to enlarge

D2300A Fully Automatic Strapping Machine D2300A Fully Automatic Strapping Machine Layout

Get a Quick Quote

Pro Pac offers competitive prices and outstanding customer service. Get a quote for the Dynaric D2300A Fully Automatic Strapping Machine - 3/8" or 1/2" and see the Pro Pac difference.

With 3/8" or 1/2" Strapping Material, Strap Up to 48 Packages per Minute

The D2300A is the operator-less machine utilizing four wide powered belts on the table tops and photo switches placing up to two straps per package automatically.

The D2300A is designed to accept 9mm (3/8") or 12mm (1/2") strap. The strapping material is heat sealed at a specific temperature for maximum seal efficiency. With a cycle time of only 1.2 seconds, this unit can handle the most demanding throughput rates encountered. Cycle initiation is by photo switch, although the unit can be switched to manual and used like a stand alone D2300 for offline applications. The D2300A has a standard table height of 800mm (31.5") and operates on 220 volt - 3 phase power.

The machine is designed with floor space and safety in mind. The coil is internally mounted therefore minimizing required floor space while utilizing an open design so that the coil is visible. For increased personal safety the strapping machine is also equipped with rounded corners on the table tops.

A couple of features that make this a user friendly unit is the automatic strap discharge and easy automatic strap feeding system. When the machine is out of strap the remaining material is automatically reversed out of the machine. Starting a new coil is as simple as pressing the start button and inserting the strap into the machine.

Features

Fully-automatic, operatorless strapping machine with tabletop photocell
State-of-the-art innovative design, with rounded corners for personal protection
Compact, lightweight assembly, for easy mobility throughout your facility
Compact, low-maintenance sealer head and internal strap dispenser minimizes required floor space
Stainless steel tensioning roller
Cycle time capable of a throughput of 50 straps per minute
Loop kick-out feature eliminates strap jams
Faster warm-up time reduces production delays
Easily accessible strap feed unit, trouble-free automatic strap feeding
Open coil cabinet permits visibility of internal strap coil
Automatic strap discharge mechanism removes any leftover strap when strap coil is finished, and in case of misfeed
External adjustment of strap tension by simple turn of a dial

Specifications of the D2300A

Overall Depth 24.8" (630 mm)
Overall Width 38.4" (976 mm)*
Overall Height 59.8" (1520 mm)*
Table Height 31.5" (800 mm)
Weight 352 lbs (160 kg)*
Cycle Time 1.2 Seconds*
Cycle Initiation Manual: Push button (manual) or photoeye (automatic)
Strap Size 3/8" to 1/2" (8 mm - 12.5 mm)
Package Size Maximum: Determined by arch / Minimum: 1.5"H x 3.5"W
Tension Externally located, adjustable: 10 - 250 lbs
Seal Head Location On the bottom: 12.4" (315 mm) either upright*
Sealing Method Heat seal
Mobility 2 swivel and 2 fixed casters
Dispenser Internally located: 8" or 9" I.D. / 8" Face / 18"O.D.
Power 220 or 440 Volt 3 Phase
* Depending on arch size