Buy your stretch film from us, and get a discount on this Orion stretch wrapper!
The Orion MA-ST, fully-automatic heavy-duty rotary tower conveyorized stretch wrapping system is designed with an easy to install, floor anchored integral stand design.
Its heavy-duty, all structural steel construction, and ring bearing tower support with chain & sprocket drive, handles loads up to 4,000 lbs and wraps at speeds up to 12 rpm.
These powerful features, along with Orion's Insta-Thread high-performance film delivery system, make the MA-ST stretch wrapper an excellent choice for medium duty production level applications requiring durability, and reliability.
The Orion Insta-Thread film delivery system faces the side for easier film roll loading and threading. The system uses specially designed rollers to accurately elongate film at a standard rate of 260%.
This highly-reliable prestretch systems features fast, simple and safe film loading, and an advanced "non-contact" film tension sensor for years of trouble-free wrapping.
A sophisticated photo eye senses even difficult colored and reflective loads, and Orion's unique Insta-Sense system pauses the wrap cycle if the stretch film breaks or runs out.
Orion builds all of their own conveyors in house for the ultimate in quality control and durability. An open mechanical design assures that motors, gearboxes, etc. are easily accessed for service or replacement. Each conveyor roller is supported by a full-length solid steel axle and welded on (not pressed on) caps. These axles are supported with individual cast housing bearings for the ultimate in strength and durability.
The film tail treatment on the MA-ST is simple, highly effective. At the end of the wrapping cycle, Orion's innovative asymmetrical film clamp grips the film web while the no-build-up thermo bar cuts the film. The load-seeking pneumatically actuated brush smooth's and secures the film tail to the side of the load as it is conveyed to the exit conveyor. The result is an attractive, secure film tail that stays in place using a minimal amount of film.
A 12" precision ring bearing is used to support and drive the rotating arm of the MA-ST. The chain & sprocket drive has soft start and stop to for minimal wear and tear on the drive system. Major components are located within easy reach for fast maintenance and service.
The MA-ST stretch wrapping machine uses an Allen Bradley / Series PLC controller for maximum flexibility and reliability. Low maintenance, long lasting AC motors are used throughout the MA-ST with advanced Variable Frequency Drives (VFD) controllers. The free standing controller is CSA approved, UL listed, and NEMA 12 rated.
Please contact Pro Pac or call 888-318-0083 for your stretch wrapping equipment.
|Rotation Speed||12 RPM||18 RPM|
|Production Capacity (Loads per Hour)||30 - 45||Up to 60|
|Maximum Load Weight||4,500 lbs||6,000 lbs|
|Maximum Wrap Height||80"||95", 110"|
|Conveyor Speed (Feet per Minute)||30||30 to 60|
|Maximum Load Size||48" x 48" (larger available)|
|Minimum Load Height||15"|
|Minimum Wrap Height||2" from conveyor roller top|
|Conveyor Roller Spacing||3.25"|
|Controller / HMI||Allen Bradley MicroLogix 1400|
|Controller NEMA Rating||NEMA 12|
|Independent Top/Bottom Wrap Counts||Standard|
|Safety Rating||Category 2 (Cat 3 option available)|
|Standard Voltage||480 VAC / 3ph / 60Hz|
|Standard Air||80 PSI @ 6 CFM|
|Warranty||3 Year components / 5 Year frame / Lifetime prestretch rollers|
|Paint Finish||Electrostatic powder coat|
We are here to help you grow your business. Increase your efficiency, reduce your costs, and quickly deliver your product to your customers.Connect With Pro Pac