Roach SZA192CDA Chain Driven Zero Pressure Accumulator Smart Zone Medium-Duty Conveyor

Medium Duty Roll-to-Roll Chain Driven Zero Pressure Accumulator

The Roach SZA192CDA Smart Zone conveyor is a medium-duty roll-to-roll chain driven zero pressure accumulator, designed to safely accumulate medium-duty loads in 5' zones. Roach Smart Zone incorporates photo electric sensors to detect product loads - instead of sensor rollers - which eliminates many problems associated with sensor rollers. Products do not touch during accumulation and are singulated individually off of conveyor. Smart Zone is easy to install and simple to maintain.

Specifications

Tread Rollers: 1.9" dia. x 12 ga., model 192S.

Chain Drive: Roller-to-roller No. 40 roller chain. Zone-to-zone No. 60 roller chain.

Chain Guard: All chains are completely enclosed along the entire length of conveyor.

Center Drive: Drive either side mounted or underside mounted (specify). Drive shafts are supported by precision, heavy duty, lubricated, ball bearing units.

Roller Centers: 4" or 6" RC only.

Speed: 35 FPM, constant.

Accumulation Zone: 5'-0" zone lengths, zone singulation operation, photo electric sensor controlled zones with air clutch. (60 psi max)

Bed: 6-1/2" x 1-1/2" x 10 ga. and 4-1/2" x 1-1/2" x 10 ga. formed steel channel frame. Bed sections are bolted together with butt couplings and floor supports.

Bearings: Removable type, heavy-duty ball bearings, zinc-plated, grease packed, labyrinth seal.

FRL: Unit is provided with filter, regulator and lubricator with 3/8" ports for 60 PSI operational pressure.

Motor Drive: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

Capacity: 300 lbs./ft. up to a maximum of 1200 lb. pallet load.

Options

Zone Lengths: 3' through 10' in 4" or 6" increments as per roller centers and zone chain pitch. Frame lengths will vary with zone lengths.

Bed: 6-1/2" x 1-1/2" x 7 ga. and 4-1/2" x 1-1/2" x 7 ga. formed steel channel frame.

Tread Rollers: 1.9" dia. x 9 ga. steel, model 199S tread rollers.

Floor Supports: Supports, knee braces, casters and polytier supports available.

Side Mounted Clutch: Consult factory for low elevation model SZ192CDAS with side mounted clutch.

Speed: Constant speed 20-120 FPM; DC variable speed; AC inverter variable speed. Other constant or variable speeds available. Minimum unit speed is 20 FPM for model CDA. Note: Capacity changes with speed.

Motors: Available through 3 HP in TEFC, explosion proof, dirty duty, brake motor, 115/230/1, 575/3, etc.

Defused Smart Zone: Photoeyes mounted below tread rollers.

Please contact Pro Pac or call 888-318-0083 for your conveyors.

Please contact Pro Pac or call 888-318-0083 for your conveyors.