Roach 700SBF Inclined Floor-to-Floor Slider Bed Belt Conveyor

Floor-to-Floor Conveyor Provides Higher Load Capacity

The Roach 700SBF floor-to-floor conveyor provides higher load capacity, reversible flow and nose-over allows for simple adjustments for inclines 0-35. Shown with optional supports, knee braces, chain driven feeder and right hand drive. All units furnished standard with left hand drive.

Specifications

Belting: Black PVC ruff-top.

Drive Pulley: 8" dia. with 1-7/16" dia. shaft, both machine crowned and fully lagged.

Tail Pulley: 4" dia., machine crowned, with 1-3/16" dia. shaft.

Return Rollers: 1.9" dia. x 16 ga. steel, model 196S, adjustable.

Center Drive: Reversible drive with 24" integral belt take-up.

Belt Speed: 60 FPM, constant.

Safety Pop-Out Roller: Standard on both ends, 1.9" dia. x 16 ga. steel roller, model 196S.

Nose-Over: Provides smooth transition from incline to horizontal position. Single nose-over adjusts 0-20 ; double nose-over adjusts 0-35  (specify single or double).

Bearings: All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.

Bed: 7" x 1-1/2" x 12 ga. channel frame with 14 ga. slider bed 9"-39" BF; 12 ga. slider bed 45" & 51" BF.

Roller Chain: Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.

Motor Drive: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

Options

Belting: 3 ply, brown neoprene ruff-top. Consult factory for other belting.

Side Mounted End Drive: Available as option when necessary to move center drive for unit clearance. Minimum horizontal nose-over length required is 3' (2' horizontal may be used if product does not overhang conveyor OAW).

Bed: Available in boxed slider bed.

Undertrussed Bed: Available to provide clearance underneath unit at bed joint locations. Specify location for undertrussing and desired clearance underneath unit. Consult factory.

Floor Supports: Various height adjustable supports and knee braces available.

Powered Feeder: Integral belt feeder or separate chain driven belt feeder.

Motors: Available through 3 HP in TEFC, explosion proof, dirty duty, brake motor, 115/230/1, 575/3, etc.

Ceiling Hangers: 5/8" dia. threaded rod w/ hardware to attach rods (specify rod length) to conveyor.

Guard Rails: 1-3/4" x 1" formed channel (model GC), adjusts horizontally to 10" wider than belt and vertically to 6" above belt; formed steel fixed (model FSG) in 2", 4", 6", 8", 12", and 18" heights.

Belt Speed: Constant speed 3-120 FPM; DC variable speed; AC inverter variable speed. Other constant or variable speeds available.

Electrical Controls: Magnetic starter (one direction or reversible); One direction manual starter; Momentary start/stop push button station; Forward / reversing / stop push button station.

Please contact Pro Pac or call 888-318-0083 for your conveyors.

Please contact Pro Pac or call 888-318-0083 for your conveyors.