Roach 796RB Medium-Duty Roller Bed Belt Conveyor

Transport Loads with Lower Horsepower

The Roach 796RB medium-duty roller bed belt conveyor is well suited for transporting unit loads with lesser horsepower requirements than slider bed belt conveyors.

Specifications

Belting: PVC-120 black.

Carrier Rollers: 1.9" dia. x 16 ga. steel rollers, model 196S.

Drive Pulley: 4" dia. with 1-3/16" dia. shaft or 8" dia. with 1-7/16" dia. shaft, both machine crowned and fully lagged.

Tail Pulley: 4" dia., machine crowned, with 1-3/16" dia. shaft.

End Drive: Allows one-direction (unit) operation; add optional center drive for reversible application.

Safety Pop-Out Roller: Standard on both ends, 1.9" dia. x 16 ga. steel roller, model 196S.

Squaring Rods: Adjustable rods on underside of bed allow frame to be squared for improved belt tracking and are standard on all units over 30'.

Bed: 7" x 1-1/2" x 12 ga. channel frame. Bed sections attached with couplings and floor supports.

Bearings: All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.

Take-Up: Screw type unit at tail pulley provides 12" belt take-up.

Belt Speed: 60 FPM, constant.

Return Rollers: 1.9" dia. x 16 ga. steel, model 196S, adjustable.

Roller Chain: Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.

Motor Drive: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

Electrical Controls: Optional.

Options

Belting: Black PVC ruff-top; 3-ply brown neoprene ruff-top; PVC-120 white food grade COS; PVC-150 black COS; 3-ply CN 40 urethane cover.

Center Drive: Reversible drive with integral belt take-up of 24". Specify location. Center drive option available on units 6'-0" long and above.

Side Mounted End Drive: Provides minimum conveyor height of 10" TOB (4" dia. drive pulley); 12" TOB (8" dia. drive pulley).

Overhead End Drive: Provides minimum conveyor height of 8" TOB (4" dia. drive pulley); 10" TOB (8" dia. drive pulley).

Nose-Over: Provides smooth transition from incline to horizontal position. Single nose-over adjusts 0-20 ; double nose-over adjusts 0-35. Feeders also available.

Belt Speed: Constant speed 10-120 FPM; DC variable speed; AC inverter variable speed. Other constant or variable speeds available. Note: Capacity changes with speed.

Auxiliary Take-Up: Provides 24" of belt take-up. Specify location.

Side Tables: Available in 9", 15" and 21" widths (14 ga.) one or both sides.

Undertrussed Bed: Available to provide clearance underneath unit at bed joint locations. Specify location for under-trussing and desired clearance underneath unit.

Motors: Available through 3 HP in TEFC, explosion proof, dirty duty, brake motor, 115/230/1, 575/3, etc.

Floor Supports: Supports, knee braces, casters and polytier supports available.

Ceiling Hangers: 5/8" dia. threaded rod with hardware to attach rods to conveyor. Provides 6' clearance between ceiling and TOB (furnished in place of floor supports).

Guard Rails: 1-3/4" x 1" formed channel (model GC), adjusts horizontally to 10" wider than belt and vertically to 6" above belt; formed steel fixed (model FSG) in 2", 4", 6", 8", 12", and 18" heights; fixed channel (model FC); 1-1/2" angle (model GA1-1/2).

Electrical Controls: Magnetic starter (one direction or reversible); One direction manual starter; Momentary start/stop push button station; Forward / reversing / stop push button station. Mounting and pre-wiring for units up to 12' long.

Please contact Pro Pac or call 888-318-0083 for your conveyors.

Please contact Pro Pac or call 888-318-0083 for your conveyors.