Roach CD280 2-Strand Chain Drag Conveyor

Chain Drag Conveyor Conveys Heavy-Duty Unit Loads

The Roach CD280 2-strand chain drag conveyor conveys heavy-duty unit loads and often are suited for products with unusual conveying characteristics such as pallets or specialty tote pans.

Specifications

Frame: 7 ga. formed boxed channel.

Carrier Chain: No. 80 (model CD280) or no. 60 (model CD260) riveted roller chain.

Wear Strip: UHMW long lasting wear strip, upper and lower.

Chain Centers: 18"

Chain Take-Up: Screw type located at tail end.

End Drive: Allows one-direction (unit) operation; add optional center drive for reversible application.

Chain Speed: 35 FPM constant.

Bearings: Heavy duty, lubricated, ball bearing unit with cast iron housings.

Capacity: Unit load not to exceed 3000 lbs.

Motor Drive: 1/2 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

Electrical Controls: Optional.

Options

Strands: 3, 4 or more.

Construction: Durable structural frame.

Chain Center: 12", 24" or as required by application.

Floor Supports: Supports available.

Chain Speed: 35-120 FPM, constant speed (specify). Other constant or variable speed available. Note: Capacity changes with speed.

Motors: Available through 3 HP in TEFC, explosion proof, dirty duty, 115/230/1, 575/3, etc.

Electrical Controls: Manual start/stop push button switch; magnetic starter; photo eye; limit switch; photo relay; others available.

Please contact Pro Pac or call 888-318-0083 for your conveyors.

Please contact Pro Pac or call 888-318-0083 for your conveyors.