Roach CT380/CT360 90 Degree 3-Strand Chain Transfer Power Conveyor

Chain Driven Conveyor Transports Totes, Drums & Pallet Loads

The Roach CT380 and CT360 90° 3-strand chain transfer power conveyors move heavy-duty unit loads up to 3000 lbs. at 90° intervals and often are suited for applications in tight quarters where room does not exist for large radius curves. Pivot type transfer and positive type lift chain transfer models available.

Specifications

Transfer Arm: 7 ga. formed channel.

Transfer Chain: No. 80 flat side bar (model CT380) or No. 60 flat side bar (model CT360) chain.

Standard Lengths: 3', 4', 5', 6', 7' and 8' unit lengths.

Chain Centers: 18"

Chain Take-Up: Screw Type.

End Drive: Allows one-direction (unit) operation; add optional center drive for reversible application.

Lift: Pivot type.

Bearings: Heavy duty, lubricated, ball bearing unit with cast iron housings.

Chain Speed: 35 FPM constant.

Motor Drive: 1/2 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

Capacity: 3000 lbs.

Air Controls: Air bag(s) with single solenoid valve. (60-80) psi required.

Cut Outs: Required through conveyor frame transfer mounts in when using end drive; may be required by application for center drive transfers also.

Electrical Controls: Optional.

Options

Speed: 2, 4 or more.

Positive Lift: Allows reversible drive and decreased overall length.

FRL: Filter, regulator, lubricator with 3/8" ports.

Floor Supports: See Conveyor Accessories for various elevations and types.

Chain Centers: 12", 24" or as required by application.

Chain Speed: 35-120 FPM, constant speed (specify). Other constant or variable speed available. Note: Capacity changes with speed.

Motors: Available through 2 HP in TEFC, explosion proof, dirty duty, 115/230/1, 575/3, etc.

Electrical Controls: Optional.

Please contact Pro Pac or call 888-318-0083 for your conveyors.

Please contact Pro Pac or call 888-318-0083 for your conveyors.