Roach 251CDLRC Heavy-Duty Chain Driven Live Roller Curve Conveyor

Chain Driven Curve Conveyor Transports Heavy Loads

The Roach 251CDLRC heavy-duty chain driven live roller curve conveyor transports heavy unit loads. Heavy castings, drums and other loads not requiring product orientation may be effectively conveyed on this conveyor.

Specifications

Tread Rollers: 2-1/2" dia. x 11 ga. steel, model 251S with sprockets.*

Chain Drive: Roller to roller with No. 60 circular roller chain.

End Drive: Reversible drive, side mounted or underside (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units.

Bearings: Precision ABEC bearings.

Roller Centers: 6" RC measured at outside radius of curve.

Motor Drive: 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

Speed: 35 FPM, constant.

Bed: 6" x 1-1/2" x 7 ga. and 4" x 1-1/2" x 7 ga. formed steel channel frame.

Chain Guard: The chain drive is enclosed, top and bottom, along the entire length of the conveyor.

Drive Location: Drive located on outside of curve. Specify right hand drive or left hand drive (drive hand determined with reference point located at outside of curve).

Electrical Controls: Optional.

* Note: Orientation of product may be affected because of straight rollers in curve. To maintain orientation, use tapered roller curve.

Options

Bed: Rollers on 4-1/2” centers on outside radius.

Speed: Constant speed 1.5-60 FPM; DC variable speed; AC inverter variable speed. Other constant or variable speeds available. Note: Capacity changes with speed. 100 FPM max. with roller-to-roller chain drive.

Motors: Available through 3 HP in TEFC, explosion proof, dirty duty, 115/230/1, 575/3, etc.

Floor Supports: Supports, knee braces, casters, ceiling hangers and polytier supports available.

Please contact Pro Pac or call 888-318-0083 for your conveyors.

Please contact Pro Pac or call 888-318-0083 for your conveyors.