Roach 254TCDLRC Medium-Duty Tapered Roller Chain Driven Live Roller Curve Conveyor

Chain Driven Curve Conveyor Transports Totes & Drums

The Roach 254TCDLRC medium-duty tapered roller chain driven live roller curve conveyor is designed to transport medium-duty loads such as castings, drums or pallet loads. Orientation of pallet loads is maintained when using this chain driven live roller curve.

Specifications

Tread Rollers: 2-1/2" dia. to 1-11/16" dia. x 14 ga. steel tapered rollers, model 254T with sprockets.

Chain Drive: Roller to roller with No. 60 circular roller chain.

End Drive: Reversible drive, side mounted or underside (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units.

Roller Centers: 6" RC measured at outside radius of curve.

Chain Guard: Chain drive is enclosed, top and bottom, along entire length of conveyor.

Bearings: Removable type, heavy duty bearings, zinc plated, grease packed, labyrinth sealed.

Motor Drive: 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

Bed: 6" x 1-1/2" x 10 ga. and 4" x 1-1/2" x 10 ga. formed steel channel frame.

Speed: 45 FPM, constant.

Drive Location: Drive located on outside of curve. Specify right hand drive or left hand drive (drive hand determined with reference point located at outside of curve).

Electrical Controls: Optional.

Options

Speed: Constant speed 1.5-60 FPM; DC variable speed; AC inverter variable speed. Other constant or variable speeds available. Note: Capacity changes with speed. 100 FPM max. with roller-to-roller chain drive.

Motors: Available through 3 HP in TEFC, explosion proof, dirty duty, 115/230/1, 575/3, etc.

Floor Supports: Supports, knee braces, casters, ceiling hangers and polytier supports available.

Electrical Controls: Magnetic or manual starter; limit switch; others available.

Please contact Pro Pac or call 888-318-0083 for your conveyors.

Please contact Pro Pac or call 888-318-0083 for your conveyors.