Roach 738LSC Light-Duty Line Shaft Curve Conveyor

Curved Light Duty Conveyor Has Tapered Rollers

The Roach 738LSC light duty line shaft driven curve conveyor features tapered rollers to help product maintain orientation. No drive is required since it is designed to be driven from 738LS straight line shaft driven sections. Includes close roller centers as a standard feature.

Specifications

Tread Rollers: 1.9" dia. to 1-3/8" dia. x 16 ga. tapered steel, model 138T w/ 5/16" hex, grooved.

Drive Belt: 3/16" dia., polyurethane belts. Nominal 7.5 lbs. per roller drive.

Drive Shaft: 1" dia. C1018 cold rolled steel shaft, located on inside radius. Note: Spools are keyed to provide positive drive (designed not to slip on drive shaft).

Couplings: Couplings located both ends (type A) or one end only (type B or C).

Universal Joints: 4 per 90 degree and 60 degree curve; 2 per 45 degree and 30 degree curve.

Bearings: Precision, lubricated, ball bearing units with composite housings. 6 bearings per 90 degree and 60 degree curve; 4 per 45 degree and 30 degree.

Bed: 7" x 1-1/2" x 12 ga. formed steel channel frame.

Tangents: 1'-0" both ends on 60 degree and 90 degree; 1'-6" both ends on 30 degree and 45 degree. 1'-0" infeed, 1'-0" discharge and no center tangent on 180 degree. Tangent roller centers 3" RC.

Motor Drive: Unit is designed to be driven by 738LS.

Electrical Controls: Optional.

Options

Floor Supports: Supports, knee braces, casters, polytier supports & ceiling hangers available.

Guard Rails: 1-3/4" x 1" formed channel (model GC), adjusts horizontally to 8" wider than roller and vertically to 6" above roller; formed steel fixed (model FSG) in 2", 4" and 6" heights; fixed channel (model FC); 1-1/2" angle (model GA1-1/2).

Please contact Pro Pac or call 888-318-0083 for your conveyors.

Please contact Pro Pac or call 888-318-0083 for your conveyors.