- WEIGH & COUNT
- Weigh Scales
& Counters
- BAG & SEAL
- Vertical Form Fill
& Seal Systems - Flow Wrapping
Machinery - Autobag Bagging
Systems - Baggers & Band Sealers
- LIQUID FILL
- Liquid Filling
Systems - Bottle Management
Systems - Depositors
- TRAY & CARTON
- Tray & Cup Fillers &
Sealers - Carton & Tray Formers
- BROWSE
- ALL CONTRACT
PACKAGING SERVICES - ABOUT QUAL PAC
- QUAL PAC CERTIFICATIONS
& REGISTRATIONS - QUAL PAC LOCATIONS
- Shrink Wrapping
Services - Shrink Bundling
Services - Blister & Clamshell
Packaging Services - Flow Wrapping
Fin Seal Services
Roach 796LSDS Medium-Duty Line Shaft Diverging Switch Conveyor
- Packaging Equipment and Machines
- Conveyor Systems
- Shuttleworth Product Handling Systems
- Roach Conveyors
- Roach Belt Slider, Box, Belt, Roller Conveyors
- Roach Belt Driven Live Roller Conveyors
- Roach Accumulation Conveyors
- Roach Line Shaft Driven Straight, Curved and Spur Conveyors
- Roach 738LS Light-Duty Line Shaft Conveyor, One Drive for Accessories
- Roach 738LSC Light-Duty Line Shaft Curve Conveyor, No Drive
- Roach 796LS Med-Duty Line Shaft Conveyor, One Drive for Accessories
- Roach 796LSC Med-Duty Line Shaft Curve Conveyor, No Drive
- Roach 796LSS Med-Duty Line Shaft Converging Spur Conveyor, No Drive
- Roach 796LSDS Med-Duty Line Shaft Diverging Switch Conveyor, Pneumatic
- Roach 796LSG Med-Duty Line Shaft Gate Conveyor, No Drive
- Roach 796LSX Med-Duty Line Shaft Cross Over Conveyor, Left or Right
- Roach RTB3 3-Strand 90 Degree 100 Pound Product Transfer Conveyor
- Roach Powered Roller Straight and Curved Conveyors
- Roach Miscellaneous Power Conveyors - Parts, Mesh Belt, Vertical, Slat
- Roach Chain Driven Live Roller Conveyors
- Roach High-Speed Sortation Conveyors
- Roach Plastic Belt Conveyors
- Roach Gravity Conveyors
- SpanTech Conveyor Systems
- Conveyor Systems
At a Glance
- Designed for diverging applications with line shaft conveyor
- Pneumatically actuated
- Quick, efficient action
Curved Medium Duty Conveyor Has Tapered Rollers
The Roach 796LSDS line shaft diverging switch conveyor is used in diverging applications where line shaft conveyor is suitable. The pivot section of rollers, pneumatically actuated, skews to divert packages onto spur quickly and efficiently.
Specifications
- Tread Rollers: 1.9" dia. x 16 ga. steel, model 196S grooved, 3" centers.
- Drive Belt: 3/16" dia., polyurethane belts. Nominal 15 lbs. per roller drive.
- Drive Shaft: 1" dia. C1018 cold rolled steel shaft. NOTE: Spools in spur section only are keyed to provide positive drive (designed not to slip on drive shaft).
- Couplings: Couplings located both ends or one end only. Specify where couplings required.
- Bed: 7" x 1-1/2" x 12 ga. formed steel channel frame. Short side of spur is always 12" overall length.
- Bearings: Precision, lubricated, ball bearing units with composite housings.
- Pneumatically Actuated: Diverging section of rollers is pneumatically actuated utilizing 60PSI maximum.
- Motor Drive: Unit is designed to be driven by 796LS.
- Direction of Flow: Specify right hand or left hand. To determine hand of spur, refer to pg. 136 in technical section.
- Minimum Package Size: Consult factory for minimum package size (minimum size may vary based on conveyor width).
- Motor Drive: Unit is designed to be driven by 796LS.
- Roller Chain: Spur driven via crossover with No. 40 chain.
Options
- Floor Supports: Supports, knee braces, casters, polytier supports & ceiling hangers available.
- Guard Rails: 1-3/4" x 1" formed channel (model GC), adjusts horizontally to 8" wider than roller and vertically to 6" above roller; formed steel fixed (model FSG) in 2", 4" and 6" heights; fixed channel (model FC); 1-1/2" angle (model GA1-1/2).
Please contact Pro Pac or call 888-318-0083 for your conveyors.
Roach 796LSDS Lengths and Unit Weights | ||||
Please contact Pro Pac or call 888-318-0083 for your conveyors.
How Can We Help You?
Let's Get Started
Call 888-318-0083