Roach 796LS Medium-Duty Line Shaft Conveyor
At a Glance
- Medium-duty line shaft driven
- Single drive for all accessories
- Reversible
Conveyor and Additions Driven by a Single Drive
The Roach 796LS medium duty line shaft driven conveyor has gained widespread usage with its unique design. Curves, spurs and a number of accessories may be driven by a single drive.
Specifications
- Tread Rollers: 1.9" dia. x 16 ga. steel, model 196S grooved.
- Drive Belt: 3/16" dia., polyurethane belts. Nominal 15 lbs. per roller drive.
- Drive Shaft: 1" dia. C1018 cold rolled steel shaft.
- Couplings: Couplings located both ends (type A), one end only (type B or C) or none (type D).
- Center Drive: Reversible drive; located approx. 18" from end of bed section for 3" and 6" RC; 16-1/2" for 4" RC.
- Bed: 7" x 1-1/2" x 12 ga. formed steel channel frame. Bed sections attached w/ splice plates and floor supports.
- Speed: 60 FPM, constant.
- Bearings: Precision, lubricated, ball bearing units with composite housings.
- Motor Drive: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
- Roller Chain: Drive shaft is driven by No. 50 chain. Chain take-up provided on motor base.
- Electrical Controls: Optional.
Options
- Side Mounted Drive: Provides overall conveyor height of 10".
- Floor Supports: Supports, knee braces, casters and polytier supports available.
- Ceiling Hangers: 5/8" dia. threaded rod with hardware to attach rods to conveyor. Provides 6’ clearance between ceiling and TOR (furnished in place of floor supports).
- Speed: Constant speed 15-120 FPM; DC variable speed; AC inverter variable speed. Minimum operating speed for line shaft conveyor is 30 FPM.
- Galvanized Rollers: Tread rollers available in galv. steel, model 196G.
- Guard Rails: 1-3/4" x 1" formed channel (model GC), adjusts horizontally to 8" wider than roller and vertically to 6" above roller; formed steel fixed (model FSG) in 2", 4" and 6" heights; fixed channel (model FC); 1-1/2" angle (model GA1-1/2).
- Motors: Available through 2 HP in TEFC, explosion proof, dirty duty, 115/230/1, 575/3, etc.
- Electrical Controls: Magnetic starter (one direction or reversible); One direction manual starter; Momentary start/stop push button station; Forward/ reversing /stop push button. Mounting and pre-wiring for units up to 12' long.
Please contact Pro Pac or call 888-318-0083 for your conveyors.
Horsepower & Drives |
HP @ 60 FPM | A MAX |
1/3, 1/2 | 21" |
3/4, 1 | 22" |
1-1/2, 2 | 23" |
Roach 796LS Conveyor Lengths and Unit Weights |
Conveyor Length | 10' | 20' | 30' | 40' | 50' | 60' | 70' | 80' | 90' | 100' | Deduct |
BF | OAW | Unit Weights (lbs) with 3" Roller Centers | Per Foot |
15" | 18" | 319 | 561 | 803 | 1044 | 1286 | 1528 | 1770 | 2011 | 2253 | 2495 | 24 |
19" | 22" | 349 | 617 | 886 | 1154 | 1423 | 1691 | 1960 | 2228 | 2497 | 2765 | 27 |
21" | 24" | 363 | 645 | 927 | 1209 | 1491 | 1773 | 2054 | 2336 | 2618 | 2900 | 28 |
25" | 28" | 393 | 701 | 1010 | 1319 | 1627 | 1936 | 2244 | 2553 | 2861 | 3170 | 31 |
27" | 30" | 408 | 729 | 1051 | 1373 | 1695 | 2017 | 2339 | 2661 | 2983 | 3305 | 32 |
33" | 36" | 452 | 814 | 1176 | 1538 | 1900 | 2262 | 2624 | 2986 | 3348 | 3710 | 36 |
39" | 42" | 496 | 898 | 1300 | 1702 | 2104 | 2507 | 2909 | 3311 | 3713 | 4115 | 40 |
Roach 796LS Conveyor Unit Weights for Other than 3" Centers |
Tread Roller Centers | 15" BF | 19" BF | 21" BF | 25" BF | 27" BF | 33" BF | 39" BF |
Per 5' | Per 10' | Per 5' | Per 10' | Per 5' | Per 10' | Per 5' | Per 10' | Per 5' | Per 10' | Per 5' | Per 10' | Per 5' | Per 10' |
4" | -14 | -28 | -17 | -34 | -19 | -37 | -21 | -42 | -23 | -45 | -27 | -53 | -31 | -62 |
6" | -18 | -36 | -34 | -68 | -37 | -74 | -42 | -84 | -45 | -90 | -53 | -106 | -62 | -124 |
Please contact Pro Pac or call 888-318-0083 for your conveyors.
Ready to Expand?
We are here to help you grow your business. Increase your efficiency, reduce your costs, and quickly deliver your product to your customers.
Connect With Pro Pac