Buy your stretch film from us, and get a discount on this Wulftec stretch wrapper!
The Wulftec automatic stretch wrappers maximize throughput and efficiency. They take care of everything; you only change the roll of film. An automatic stretch wrapper will save significant time and money.
The WCRT-200 can keep up with even the most demanding production rates. It can wrap almost anything. It is ideal for wrapping very light, very heavy, tall or unstable loads and also great in wash-down and dusty applications.
Please contact Pro Pac or call 888-318-0083 for your stretch wrapping equipment.
Production Rate | 100 loads per hour |
Machine Dimensions | 138" L x 148" W x 140" H |
Maximum Load Size | 48" L x 48" W x 80" H |
Load Weight | 5000 lbs (6000 lbs optional) |
Approximate Shipping Weight | 4500 lbs |
Electrical Requirements | 230 V /3 ph /60Hz 35A |
Pneumatic Requirements | 3 cfm @ 80 psi |
Controls | NEMA 4/12 control cabinet with quick disconnect Allen Bradley PanelView Plus 600 color touch screen interface Allen Bradley CompactLogix L16ER PLC with an integrated Ethernet port 24V control system Current overload protection Sick autoheight sensing photoeye with on/off mode Power on/off lockable switch and indicator light Two emergency stop stations (1 on panel / 1 in wrap zone) Manual mode for rotation fwd/rev and carriage up/down Variable rotary arm speed (15 RPM) Double brush dust tight slip ring Intuitive alarms diagnostic Cycle counter Reset function Separate top and bottom wrap selections (0-9) Separate up and down carriage speeds Manual conveyor jog fwd only (fwd/rev optional) Film force to load control Manual clamp jog Alarm beacon Dynamic braking system for rotary arm with AC drive 120 VAC outlet in control panel for service work 1 HP 230VAC motor & AC variable frequency drive |
Film Delivery System | Lifetime warranty on pre-stretch rollers blue compound 20" NO-THREAD® Powered Pre-Stretch Carriage Film force release for easy pull at start and end of cycle 50-300% pre-stretch ratio (preset to customer spec, Std 200%) Electronic film tension control with analog sensor Sensing device for film out/broken with visual alarm Lexan roller cover for operator safety |
Film Carriage Drive | Emergency stop for arm path obstruction Angled carriage to wrap approx. 2" from conveyor level 1 HP AC motor with Allen Bradley variable frequency drive Two #50 carriage lifting chains Dual steel supporting boom Power track for efficient guiding of wires Machined UHMW-PE carriage glides on 1/2" CRS rails |
Film Tail Treatment | Film alignment arm Automatic film clamping device Pulsed controlled cutter Brush-on film tail treatment Heat Seal treatment optional |
Structure | Heavy duty structural steel construction: easy access to all components Four 6" x 6" floor mounting legs Free standing integrated leg design |
Rotary Arm Drive | 1 HP AC motor with Allen Bradley variable frequency drive Counter-balanced rotary arm for smooth rotation Safety fencing with security door 17 RPM variable speed (up to 35 RPM) Automated remote lube station Dual steel boom rotary arm Electronic soft start/stop Positive arm alignment controlled by "Proximity Sensor" Dynamic braking system for rotary arm with AC drive Protective guard covering ring gear 25" Heavy duty Ring GEAR Bearing, with Pinion GEAR Drive Heavy duty structural steel construction: easy access to all components |
Turntable Drive | 25" Heavy duty ring GEAR with pinion gear drive 0-15 RPM variable speed 1 1/2 HP 230VAC motor with Allen Bradley variable frequency drive Electronic soft start/stop Positive turntable alignment controlled by proximity sensor Electric brake for turntable |
Safety Features | 5 photoeyes which monitor access points to wrapping zone and prevent accidental insertion of foreign object during wrapping 2 E-Stop mushroom type push buttons: 1 on control panel, and 1 in wrapping zone (Additional E-Stop are available upon request) Wrapping zone enclosed by heavy-duty personnel obstruction fencing complete with electronically interlocked access door An object obstruction safety device stops the machine functions should there be any interference in the wrapping area |
Conveyor | Standard pass height 18" Powered process conveyor, 11'-6" long Other pass heights available, please consult factory 2- 1/2" diameter rollers on 3" centers 52" BFR (between frame rails) 3/16" walls cold rolled electric welded steel rollers All rollers driven via #40 chain 1 HP 230VAC motor with contactor starter Heavy-duty structural steel design, interlocking style for continuous equal roller spacing Heavy-duty cast iron flange mounted bearings 35 FPM Fix speed (other optional speeds available) |
Technical Information | The machine is provided with a manual including electro/mechanical schematics and drawings, maintenance program and PLC program disk |
Carriage | 30" NO-THREAD® Powered Pre-Stretch Carriage Carriage adaptor bracket for 20" film on 30" carriage Pneumatic roping dual Pneumatic roping single |
Controls | Communication bypass mode Lanyard remote Remote push button station Warning alarm / horn |
Conveyors | Add 5' infeed and outfeed conveyors |
Extension | Wrap arm diameter extension - 104in Wrap arm diameter extension - 116in Wrap arm diameter extension - 92in Wrap height extension - 104in Wrap height extension - 116in Wrap height extension - 92in |
Heat Seal | Conveyor side mounted heat seal |
Motors | Wash-down motors on conveyor |
Paint | Custom color Epoxy paint Steel-it paint |
Photoeye | Dark load detection Forklift detection |
Safety | Safety package |
Scale | Electronic scale |
Speed | High speed - variable up to 24 RPM High speed - variable up to 30 RPM High speed - variable up to 35 RPM |
Temperature Package | Cold A (32 to 41°F / 0 to 5°C) Cold B (5 to 32°F / -15 to 0°C) - Without process conveyor Cold C (-31 to 5°F / -35 to -15°C) Fan & Exhaust Warm A (up to 115°F / up to 46°C) Warm B (104°F / 40°C and up) |
Top Platen | Electric top platen |