Buy your stretch film from us, and get a discount on this Wulftec stretch wrapper!
Click to enlarge
The Wulftec WCRT-CRW model, an automatic free standing rotary arm cocoon roll stretch wrapper, is the ideal stretch wrapping solution for your unique needs.
Please contact Pro Pac or call 888-318-0083 for your stretch wrapping equipment.
Production Rate | 100 loads per hour |
Machine Dimensions | 138" L x 148" W x 140" H |
Maximum Load Size | 48" L x 48" W x 80" H |
Load Weight | 5000 lbs (6000 lbs optional) |
Approximate Shipping Weight | 4500 lbs |
Electrical Requirements | 230 V /3 ph /60Hz 35A |
Pneumatic Requirements | 3 cfm @ 80 psi |
Controls | NEMA 4/12 control cabinet with quick disconnect Allen Bradley PanelView Plus 600 color touch screen interface Allen Bradley SLC 5/03 PLC 24V control system Current overload protection Sick autoheight sensing photoeye with on/off mode Power on/off lockable switch and indicator light Two emergency stop stations (1 on panel / 1 in wrap zone) Manual mode for rotation fwd/rev and carriage up/down Variable rotary arm speed (15 RPM) Double brush dust tight slip ring Intuitive alarms diagnostic Cycle counter Reset function Separate top and bottom wrap selections (0-9) Separate up and down carriage speeds Manual conveyor jog fwd only (fwd/rev optional) Film force to load control Manual clamp jog Alarm beacon Dynamic braking system for rotary arm with AC drive 120 VAC outlet in control panel for service work 1 HP 230VAC motor & AC variable frequency drive |
Film Delivery System | Lifetime warranty on pre-stretch rollers blue compound 20" NO-THREAD® Powered Pre-Stretch Carriage Film force release for easy pull at start and end of cycle 50-300% pre-stretch ratio (preset to customer spec, Std 200%) Electronic film tension control with analog sensor Sensing device for film out/broken with visual alarm Lexan roller cover for operator safety |
Film Carriage Drive | Emergency stop for arm path obstruction Angled carriage to wrap approx. 2" from conveyor level 1 HP AC motor with Allen Bradley variable frequency drive Two #50 carriage lifting chains Dual steel supporting boom Power track for efficient guiding of wires Machined UHMW-PE carriage glides on 1/2" CRS rails |
Film Tail Treatment | Film alignment arm Automatic film clamping device Pulsed controlled cutter Brush-on film tail treatment Heat Seal treatment optional |
Structure | Heavy duty structural steel construction: easy access to all components Four 6" x 6" floor mounting legs Free standing integrated leg design |
Rotary Arm Drive | 1 HP AC motor with Allen Bradley variable frequency drive Counter-balanced rotary arm for smooth rotation Safety fencing with security door 17 RPM variable speed (up to 35 RPM) Automated remote lube station Dual steel boom rotary arm Electronic soft start/stop Positive arm alignment controlled by "Proximity Sensor" Dynamic braking system for rotary arm with AC drive Protective guard covering ring gear |
Safety Features | 5 photoeyes which monitor access points to wrapping zone and prevent accidental insertion of foreign object during wrapping 2 E-Stop mushroom type push buttons: 1 on control panel, and 1 in wrapping zone (Additional E-Stop are available upon request) Wrapping zone enclosed by heavy-duty personnel obstruction fencing complete with electronically interlocked access door An object obstruction safety device stops the machine functions should there be any interference in the wrapping area |
Technical Information | The machine is provided with a manual including electro/mechanical schematics and drawings, maintenance program and PLC program disk |
Carriage | 30" NO-THREAD® Powered Pre-Stretch Carriage Carriage adaptor bracket for 20" film on 30" carriage Pneumatic roping dual Pneumatic roping single |
Controls | Communication bypass mode Warning alarm / horn |
Motors | Wash-down motors on conveyor |
Photoeye | Dark load detection Forklift detection |
Safety | Safety package |
Scale | Electronic scale |
Temperature Package | Cold A (32 to 41°F / 0 to 5°C) Cold B (5 to 32°F / -15 to 0°C) - Without process conveyor Cold C (-31 to 5°F / -35 to -15°C) Fan & Exhaust |