Buy your stretch film from us, and get a discount on this Wulftec stretch wrapper!
The WRTA-100 automatic rotary arm stretch wrapping system is column-mounted. A great, low-cost automatic rotary arm wrapper for light and unstable or heavy pallet loads.
Please contact Pro Pac or call 888-318-0083 for your stretch wrapping equipment.
|Production Rate||50 loads per hour|
|Machine Dimensions||135.5" L x 130" W x 120" H|
|Maximum Load Size||54" L x 54" W x 80" H|
|Approximate Shipping Weight||2300 lbs|
|Electrical Requirements||120 V /1 ph /60Hz 15A|
|Pneumatic Requirements||3 cfm @ 80 psi|
|Controls||Allen Bradley MicroLogix 1200 PLC 24V control system Current overload protection NEMA 4/12 control cabinet (can be located up to 10' from machine frame) Autoheight sensing photoeye Power on/off switch and status light Start/stop push button Large emergency stop (push / pull type) Manual carriage up/down function Variable rotary arm speed (12RPM) Separate up and down carriage speeds Separate top and bottom wrap selectors Reinforced wrap/manual rotation control Positive arm alignment controlled by proximity sensor Top cover pause switch (Splash proof program) Spiral up or spiral up/down switch Film force to load control Emergency stop sensor for arm path obstruction Mode switch (Manual or Automatic) Pull cord with 40' of cable (to be installed by customer) Separate station on front of tower with clamp jog and an additional e-stop Lack of film alarm|
|Film Delivery System||20" NO-THREAD® Powered Pre-Stretch Carriage 1 HP AC motor with Allen Bradley variable frequency drive Lifetime warranty on pre-stretch rollers blue compound Film force release for easy pull at start and end of cycle 50-400% pre-stretch ratio (preset to customer spec, Std 200%) Electronic film tension control with analog sensor Lexan roller cover for operator safety Angled carriage to wrap approximately 2" from floor level Proximity sensor on carriage gate to ensure gate is properly closed|
|Film Carriage Drive||1 HP AC motor with Allen Bradley variable frequency drive Two #50 carriage lifting chains Dual 1/2" CRS ways with UHMW-PE carriage glides Dual structural steel supporting boom Power track for efficient guiding of wires|
|Film Tail Treatment||Automated cut/clamp & wipe system Pulse controlled cutter Film alignment arm & brush on film tail treatment|
|Structure||Heavy duty structural steel construction 10" Square tubing column Floor mounting integrated design with 10 anchor points Easy access to all components|
|Achoring Requirements||Wulftec recommends using heavy-duty expansion shields of 3/4" diameter thread size with a minimum anchor depth of 4" in concrete To be I-beam (6" to 8") mounted, 2 anchors at the bottom and 2 bolts on the top of the machine frame|
|Rotary Arm Drive||Heavy duty 25" ring gear with pinion gear drive 1 HP AC motor with Allen Bradley variable frequency drive 0-12 RPM variable speed Electronic soft start/stop Positive arm alignment controlled by proximity sensor Protection guard over the ring gear|
|Technical Information||The machine is provided with a manual including electro/mechanical schematics and drawings, troubleshooting guide and installation instructions|
|Auto Lube||Auto lube system|
|Carriage||30" NO-THREAD® Powered Pre-Stretch Carriage Carriage adaptor bracket for 20" film on 30" carriage Pneumatic roping dual Pneumatic roping single|
|Controls||Lanyard remote Remote push button station Safety control lockout Upgrade from standard to deluxe Upgrade from standard to standard Plus Warning alarm / horn Warning flashing light|
|Extension||Wrap arm diameter extension - 104in Wrap arm diameter extension - 92in Wrap height extension - 104in Wrap height extension - 92in|
|Paint||Epoxy paint Steel-It paint|
|Photoeye||Dark load detection|
|Safety||Electric dump valve Safety fencing Safety light curtains Safety package|
|Temperature Package||Cold A (32 to 41°F / 0 to 5°C) Cold B (5 to 32°F / -15 to 0°C) - Deluxe panel Cold B (5 to 32°F / -15 to 0°C) - Standard panel Fan & Exhaust Warm A (up to 115°F / up to 46°C) Warm B (104°F / 40°C and up)|
|Transformer||Customized transformer Standard transformer Transformer for Cold C temperature package|
Pro Pac offers competitive prices and outstanding customer service. Get a quote for our Wulftec WRTA-100 Automatic Rotary Arm Stretch Wrapper and see the Pro Pac difference.
We are here to help you grow your business. Increase your efficiency, reduce your costs, and quickly deliver your product to your customers.Connect With Pro Pac