Buy your stretch film from us, and get a discount on this Wulftec stretch wrapper!
The Wulftec SMLCA-277 is an automated twin-station conveyorized turntable stretch wrapping system. With the accumulation conveyor, this stretch wrapper is always ready for the next load, always ready to wrap.
The Wulftec SMART Series is a competitively-priced series of semi automatic low and high profile turntable stretch wrappers. A smart approach to semi-automatic stretch wrapping.
Please contact Pro Pac or call 888-318-0083 for your stretch wrapping equipment.
|Production Rate||55 loads per hour|
|Machine Dimensions||109.5" L x 51" W x 99" H|
|Maximum Load Size||48" L x 48" W x 80" H|
|Load Weight||4000 lbs|
|Approximate Shipping Weight||2900 lbs|
|Electrical Requirements||120 V /1 ph /60Hz 15A|
|Pneumatic Requirements||3 cfm @ 80 psi|
|Controls||Allen Bradley MicroLogix 1200 PLC 24V control system Current overload protection NEMA 4/12 control cabinet Autoheight sensing photoeye Power on/off switch and status light Start/stop push button Large emergency stop (push / pull type) Manual carriage up/down function Variable table speed (16 RPM) with automatic home position Separate up/down carriage speeds adjustment Separate top and bottom wrap selectors (0-9) Reinforced wrap/manual rotation control Film tension adjustment Top cover pause switch (splash proof program) Mode switch (manual or automatic) Pull cord with 40' of cable (to be installed by customer) Separate station on front of tower with clamp jog and an additional E-stop Lack of film alarm|
|Structure||14 gauge formed steel tower Forklift Portable base design Heavy duty structural steel construction|
|Film Delivery System||20" NO-THREAD® Powered Pre-Stretch Carriage 1 HP AC motor with Allen Bradley variable frequency drive Lifetime warranty on pre-stretch rollers blue compound Film force release for easy pull at start and end of cycle 50-400% pre-stretch ratio (preset to customer spec, standard 200%) Electronic film tension control with analog sensor Film roping bar Lexan roller cover for operator safety Proximity sensor on carriage gate to ensure gate is properly closed|
|Film Tail Treatment||Automated cut/clamp and wipe system Pulse controlled cutter Film alignment arm and brush on film tail treatment|
|Film Carriage Drive||1 HP AC motor with Allen Bradley variable frequency drive Two #50 carriage lifting chains enclosed in tower for safety Bearing supported maintenance free guide wheels|
|Turntable||77" dia. 3/8" steel plate 32 heavy duty non metallic lube-free table supports 3-1/8" table height 2-3/8" high base with full surround for safety and strength|
|Turntable Drive||0-16 RPM variable speed 1 HP AC motor with Allen Bradley variable frequency drive #50 ANSI heavy duty chain drive Electronic soft start/stop Positive turntable alignment controlled by proximity sensor|
|Turntable Conveyor||76" dia. 1/4 " steel plate 2 1/2" dia. rollers on 3" centers All rollers driven 3/16" wall cold rolled electric welded steel rollers 52" BFR (between frame rails) 1 HP AC motor with Allen Bradley variable frequency drive #40 ANSI chain drive Heavy duty cast iron flange mounted bearing|
|Conveyor||5' outfeed contoured gravity conveyor Standard 52" BFR (between frame rails) Standard pass height 10" 2 1/2" diameter rollers on 3" centers 3/16" walls cold rolled electric welded steel rollers Heavy-duty structural steel design, interlocking style for continuous equal roller spacing Heavy-duty ball bearings|
|Technical Information||The machine is provided with a manual including electro/mechanical schematics and drawings, troubleshooting guide and installation instructions|
|Carriage||30" NO-THREAD® powered pre-stretch carriage Carriage adaptor bracket for 20" film on 30" carriage Pneumatic roping dual Pneumatic roping dual - extra photoeye Pneumatic roping single|
|Controls||Foot pedal start / stop Lanyard remote Safety control lockout Upgrade from basic to deluxe Warning alarm / horn Warning flashing light|
|Extension||Wrap height extension - 104in Wrap height extension - 116in Wrap height extension - 128in Wrap height extension - 92in|
|Heat Seal||Arm mounted cut & seal|
|Motors||Wash down motors Wash-down motors for top platen|
|Photoeye||Dark load detection|
|Safety||Electric dump valve Safety fencing Safety light curtains Safety Package|
|Temperature Package||Cold A (32 to 41°F / 0 to 5°C) Cold A (32 to 41°F / 0 to 5°C) - Deluxe panel Cold B (5 to 32°F / -15 to 0°C) - Deluxe panel Cold B (5 to 32°F / -15 to 0°C) - Standard panel Fan & Exhaust Warm A (up to 115°F / up to 46°C) Warm B (104°F / 40°C and up)|
|Top Platen||Electric top platen|
|Transformer||Customized transformer Standard transformer Transformer for Cold C temperature package|
Pro Pac offers competitive prices and outstanding customer service. Get a quote for our Wulftec SMLCA-277 Automatic Turntable Stretch Wrapper and see the Pro Pac difference.
We are here to help you grow your business. Increase your efficiency, reduce your costs, and quickly deliver your product to your customers.Connect With Pro Pac