A-B-C 400T High-Speed Tape Sealing Case Erector

Tape Seal Cases Up to 35 per Minute

Starting with this erector's heavy steel frame, the A-B-C 400T high-speed tape sealing case erector is built with production features that ensure reliable, long term operation on the packaging line. Its powerful, continuous-motion drive speeds through case forming and sealing and the walking beam case transfer squares cases as they travel. Built for real-world production, this erector has features that accommodate poor corrugated material and keep on running.

Combining top productivity and low cost of ownership, this powerful case erector will be a solid addition to your packaging line.

Machine Features

Designed to run out-of-spec corrugated, warped KDs, and high recycled content cases

Erect and tape seal cases to 35 cpm

Low level magazine- load KDs with no lifting

Tape roll replacement is quick and easy

No tools changeover

Benefits

Intelligent Machine Control Simplifies Setup and Diagnostics: Case selection is easy and intuitive at the touchscreen control center. Simply choose the case size and speed and you're done. The color display shows real-time operating data and allows independent operation of all functions, diagnostics, and changeover settings. Simple, step-by-step sequences simplify set up and operation. Non-contact sensors monitor machine operation and ensure precise timing of each operating sequence.

Knockdown Magazine Eliminates Lifting and Allows More Time between Refills: No more lifting heavy cases! This ergonomic,floor level magazine eliminates a potential source of liability found in mid and high level case magazines. The standard high capacity magazine holds three stacks of cases, giving your attendant more time between refills. Knockdown stacks feed automatically and cases can be added at any time. An extended magazine is also available.

Top Feed Magazine Runs Warped and Band-Marked Cases: This case erectors top feed magazine design eliminates back pressure that can cause misfeeding in vertical feed magazines. Cases are lifted by dual, springloaded grippers that self-adjust to lift cases from uneven stacks caused by warp or band marks.

Complete Control for Case Opening: At the opening station, cases are gripped from below as the reciprocating arm pulls them open. This dual pullback system is forgiving to cases with poor manufacturer's joints and positively opens doublewall styles. The automatic blowback system keeps air lines clean.

Case Opening on Outer Flap Ensures Smooth Inner Flap Closing: A-B-C's vacuum case opening technology smoothly opens even warped and bent cases, unlike pin-style openers which require straight corrugated flutes for proper operation. Over-opening the case on the flaps ensures successful inner flap closing, even when running cases with out-of-spec manufacturer's joints.

No-Tool 5 minute Changeover:Changeover for the full case range is completed without tools, using rapid adjust hand cranks and slides with locking handles.

Options

Magazine extensions for additional knockdown blank capacity

Gull-wing style high visibility machine doors

CSSC case capability

Repeatable position indicators on adjustment shafts

Low tape-No tape sensors ensure quick roll replacement and eliminate tape head rethreading

Machine Specifications

High Performance Features:

Heavy steel, box-style frame construction

All-mechanical main drive

High capacity vacuum system

Direct drive walking beam case transfer

High efficiency motors

Features for Reliable Operation:

A-B-C's Intelligent Control electronics provide total control of operation

Low level case magazine holds 3 stacks of cases (approx. 300 kd’s) eliminating frequent refills

Automatic case feed from top of stack by dual floating grippers to smoothly feed warped or band-marked cases

Dual top and bottom vacuum grippers that over-open cases ensuring proper opening of cases with poor manufacturer's joints

Reliable walking beam case transfer

Self-lubricating air cylinders

Tape machine can be converted to hot melt sealing / hot melt version can be converted to tape sealing

Reduced Maintenance Features:

Proximity sensors with quick disconnect

Sealed bearings throughout

Gull-wing style high visibility machine doors allow easy machine access

Touchscreen control for machine jog, diagnostics, troubleshooting, changeover settings

Case discharge back-up eye for surge control

Elevated beacon fault light

Variable Speed Capability:

Up to 35 cases per minute (dependent on case sizes)

Speed ramps up and down to suit line speed- all settings are automatically adjusted as speed changes

Soft Stop - quits operation without dumping air

Cycle stop - cycles out all cases before stop

Main drive jog function

Manual operation of all functions

Standard Fault Detection Features:

No/low air pressure

Downstream case backup

Case magazine is empty or low

Guard door opened

Case did not open properly

Emergency stop activated

Motor overload

Encoder or coupling malfunction

Individual sensor malfunction

Minimum speed fault

Fault alarm history record

Specifications

Case range: RSC and HSC cases

Electrical: Primary 230 or 460v, 60hz, 3ph, NEMA 12

Air: 0.576 scfm per cycle at 80 psi

Speed: Up to 35 cases/minute

Please contact Pro Pac or call 888-318-0083 for your case erecting equipment.