Roach 196LRC Medium-Duty Belt Driven Live Roller Curve Conveyor

Convey, Transfer, Load and Unload Medium-Weight Items

The Roach 196LRC live roller curve conveyor features tapered rollers to maintain product orientation. Reversible, it is also commonly slave driven from 196VP and 796CALR making it the ideal curve in medium-duty applications.

Specifications

Tread Rollers: 2-1/2" dia. to 1-11/16" dia. x 14 ga. steel tapered rollers, model 254T; 1.9" dia. x 16 ga. steel straight tangent rollers, model 196S.

Roller Centers: 1-9/16" measured at inside radius of unit.

Pressure Sheaves: Provides drive belt pressure to upper tread rollers.

Belt: B section V-belt.

Take-Up: Screw type adjustable sheave with flat idler sheaves to maintain belt tension.

Tangents: 1'-0" both ends on 90 ; 1'-6" both ends on 45 ; 1'-0" both ends on 180 degrees. Tangent roller centers provided on 3" RC.

Bed: 7" x 1-1/2" x 12 ga. formed steel channel frame.

Speed: 60 FPM, constant.

Bearings: End shafts are supported by precision, heavy duty, lubricated, ball bearing units with cast iron housings.

Roller Chain: Drive shaft is driven by No. 50 chain.

Motor Drive: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor, located at infeed end of curve below bed on 45 degree and 90 degree curves; 3/4 HP supplied on all 180 degree curves.

Drive Location: Drive located on outside of curve. Specify left hand tangent length, right hand tangent length and drive location (left hand drive or right hand drive). Note: Drive hand determined with reference point located at outside of curve. For models slave driven (less drive), specify drive shaft location.

Capacity: 500 lb. total distributed live load.

Options

Side Mounted End Drive: Provides minimum overall conveyor height of 10".

Drive: Located on inside radius of curve.

Speed: Constant speed 10-120 FPM; DC variable speed; AC inverter variable speed. Other constant or variable speeds available.

Floor Supports: Various elevation and types available.

Ceiling Hangers: 5/8" dia. threaded rod with hardware to attach rods to conveyor. Provides 6' clearance between ceiling and TOR (furnished in place of floor supports).

Tangent Lengths: 1'-6", 2'-0", 2'-6", 3'-0", 3'-6", 4'-0", 4'-6" and 5'-0" tangent lengths available on 45 degree and 90 degree. Total combined length of tangents not to exceed 6'-0".

Guard Rails: 1-3/4" x 1" formed channel (model GC), adjusts horizontally to 8" wider than roller and vertically to 6" above roller; formed steel fixed (model FSG in 2", 4", 6", 8", 12" and 18" heights; 1-1/2" angle (model GA1-1/2).

Motors: Available through 3 HP in TEFC, explosion proof, dirty duty, brake motor, 115/230/1, 575/3, etc.

Electrical Controls: Magnetic starter (one direction or reversible); One direction manual starter; Momentary start/stop push button station; Forward/reversing/stop push button station.

Please contact Pro Pac or call 888-318-0083 for your conveyors.

Please contact Pro Pac or call 888-318-0083 for your conveyors.