Buy your stretch film from us, and get a discount on this Wulftec stretch wrapper!
The Wulftec SML-EXT low-profile standard base has a 2' extension for extra space between the load and the tower, designed for large pallet loads.
The Wulftec SMART Series is a competitively-priced series of semi automatic low and high profile turntable stretch wrappers. A smart approach to semi-automatic stretch wrapping.
Please contact Pro Pac or call 888-318-0083 for your stretch wrapping equipment.
|Production Rate||55 loads per hour|
|Machine Dimensions||141.5" L x 66" W x 86.5" H|
|Load Weight||5000 lbs|
|Approximate Shipping Weight||2800 lbs|
|Electrical Requirements||120 V /1 ph /60Hz 15A|
|Controls||Allen Bradley MicroLogix 1200 PLC 24V control system Current overload protection NEMA 4/12 control cabinet Autoheight sensing photoeye Power on/off switch and status light Start/stop push button Large emergency stop (push / pull type) Manual carriage up/down function Variable table speed (16 RPM) with automatic home position Separate up/down carriage speeds adjustment Separate top and bottom wrap selectors (0-9) Reinforced wrap/manual rotation control Film tension adjustment Lack of film alarm|
|Structure||14 gauge formed steel tower Forklift Portable base design Heavy duty structural steel construction|
|Film Delivery System||20" NO-THREAD® Powered Pre-Stretch Carriage 1 HP AC motor with Allen Bradley variable frequency drive Lifetime warranty on pre-stretch rollers blue compound Film force release for easy pull at start and end of cycle 50-400% pre-stretch ratio (preset to customer spec, standard 200%) Electronic film tension control with analog sensor Film roping bar Lexan roller cover for operator safety Proximity sensor on carriage gate to ensure gate is properly closed|
|Film Carriage Drive||1 HP AC motor with Allen Bradley variable frequency drive Two #50 carriage lifting chains enclosed in tower for safety Bearing supported maintenance free guide wheels|
|Turntable||65" dia. 3/8" steel plate 32 heavy duty non metallic lube-free table supports 3" table height 2-3/8" high base Ramp accessible on all three sides (consult factory when ordering more than one ramp)|
|Turntable Drive||0-16 RPM variable speed 1 HP AC motor with Allen Bradley variable frequency drive #50 ANSI heavy duty chain drive Electronic soft start/stop Positive turntable alignment controlled by proximity sensor|
|Technical Information||The machine is provided with a manual including electro/mechanical schematics and drawings, troubleshooting guide and installation instructions|
|Carriage||20" hydraulic carriage (no pre-stretch) 30" hydraulic carriage (no pre-stretch) 30" NO-THREAD® Powered Pre-Stretch Carriage Carriage adaptor bracket for 20" film on 30" carriage Manually adjustable dual roping bar Manually adjustable single roping bar Pneumatic roping dual Pneumatic roping dual - extra photoeye Pneumatic roping single Rapid Cut - Basic panel Rapid Cut - Standard panel|
|Clamp||SMART start clamp and pull cord|
|Controls||Economy panel Foot pedal start / stop Lanyard remote Pull cord Remote push button station Safety control lockout Upgrade from Basic to Deluxe Upgrade from Basic to Standard Upgrade from Basic to Standard Plus Upgrade from Standard to Standard Plus Warning alarm / horn Warning flashing light Wrap sequence for basic panel|
|Extension||Wrap height extension - 92in Wrap height extension - 104in Wrap height extension - 116in Wrap height extension - 128in|
|Motors||Wash down motors Wash-down motors for top platen|
|Paint||Custom color Epoxy paint Steel-it paint|
|Photoeye||Dark load detection|
|Ramp||Ramp Ramp extension|
|Safety||Safety fencing> Safety fencing for dual turntable units Safety light curtains|
|Scale||Electronic scale Electronic scale above ground Electronic scale in ground|
|Temperature Package||Cold A (32 to 41°F / 0 to 5°C) Cold A (32 to 41°F / 0 to 5°C) - Deluxe panel Cold B (5 to 32°F / -15 to 0°C) - Deluxe panel Cold B (5 to 32°F / -15 to 0°C) - Standard panel Cold C (-31 to 5°F / -35 to -15°C) - Deluxe panel Cold C (-31 to 5°F / -35 to -15°C) - Standard panel Fan & Exhaust Warm A (up to 115°F / up to 46°C) Warm B (104°F / 40°C and up)|
|Top Platen||Electric top platen|
|Transformer||Customized transformer Standard transformer Transformer for Cold C temperature package|
|Turntable||90° exit Free roller top Free roller transition High speed 24RPM Second turntable|
Pro Pac offers competitive prices and outstanding customer service. Get a quote for our Wulftec SML-EXT Semi-Automatic Turntable Stretch Wrapper and see the Pro Pac difference.
We are here to help you grow your business. Increase your efficiency, reduce your costs, and quickly deliver your product to your customers.Connect With Pro Pac