Roach 596PRA Photoeye Controlled Zero Pressure Powered Roller Conveyor

Motorized Rollers Drive the Conveyor with Rollers Set High

The Roach 596PRA powered roller accumulator conveyor revolutionizes the automated conveyor industry. With rollers set high, motorized rollers drive the conveyors eliminating the need for drive belts, chains or line shafts.

Specifications

Tread Rollers: 1.9" dia. x 16 ga. galvanized, model 196G grooved.

Drive Belt: 3/16" dia., polyurethane belts. Nominal 15 lbs. per roller drive.

Capacity: 15 lbs. per roller or up to 70 lbs. per zone.

Speed: 60 FPM, constant.

Roller Centers: 3"

Bed: 5" x 1-3/4" x 10 ga. formed steel channel frame. Rollers set high in frame.

Accumulation: Zone singulation operation; 24" zone length; zones are actuated using a photoeye.

Motor Drive: Driven by 24V DC powered roller.

Bearings: Precision ABEC bearings.

DC Power Supply: 24 volt fixed output required.

Options

Accumulation Zones: 18" and 30" long zones available, depending on roller centers.

Floor Supports: Supports, knee braces, casters and polytier supports available.

Conveyor Speed: Constant speed 34-260 FPM

Ceiling Hangers: 5/8" dia. threaded rod with hardware to attach rods to conveyor. Provides 6' clearance between ceiling and TOR (furnished in place of floor supports).

Diffuse Photoeye: Photoeyes mounted below the tread rollers.

Bed: Control side 7" x 1-3/4" x 12 ga. formed steel channel frame. Rollers set low in frame. Outside channel 5" x 1-3/4" x 10 ga. formed steel channel frame. Rollers set high in frame.

Please contact Pro Pac or call 888-318-0083 for your conveyors.

Please contact Pro Pac or call 888-318-0083 for your conveyors.